How to Build Efficient Factories (tips, tricks and strategies)

There are many important mechanics that players need to understand if they hope to excel in their world Satisfactoryincluding building an efficient factory. One of the most important aspects of the game is that players must understand how to create the most efficient and organized factories possible. If the factory is more organized the player can control it faster and get the necessary resources more effective. This guide shows players how to build efficient factories.

In the game, players will have to figure out how to mine each one Satisfactoryuse their resources and turn them into usable parts. They too you need to be able to carry each of these resources back to the main plant area using things like conveyor belts and pipe systems. Players who fail to do these will never be able to advance to the next stages of the game.

Satisfactory: How to Build the Most Efficient Factories

Balancing load with production

Knowing where everything is makes the player's life much easier. For example, smelting ores away from the main base is recommended as Satisfactory, as raw ore takes up a lot of space and makes the base size quite massive. In addition, players should also use a calculator to figure out how much space they require for their base.

This includes reception Consider additional space for expansion and greater efficiency. Another tip that complacent players can follow is to not draw any walls until everything is finished, as they may have to reconfigure layouts and lights. Alternatively, you can use a recipe from someone like YouTuber SpectrumDad figure out the exact numbers and layout you need for your starting factory.

See exactly what to keep in mind in the categories below:

Separation by type

This is one of the most important things players can keep in mind when designing their factories keeping things separate and in their own areas. If a player has a section in their factory that is used to turn Iron Ore into simple Iron parts, then they don't want to drop machines that make Copper parts there. It can get confusing very quickly, so it's for the best build a separate factory or additional floor for any other Resource types.

It gets a little more difficult complex types of parts such as steel that require iron, copper and coal to create. Instead of sorting by resource type, the player should do this separate areas according to the types of machined parts. Own an Iron, Copper or Steel parts factory or floor.

This can be done using different types dividers and joints to move the parts to the right place prepare the various parts you need. In the beginning you will build things like Iron Plates and Concrete, but you need it master these construction fundamentals early so you can make more complex builds later.

Chaotic Starts to Fuel Larger Builds

Each player must start somewhere and you won't have the biggest and most efficient factory. One of the biggest mistakes players can make is trying to create an organized factory Satisfactory immediately in the game, which will take a lot of players' time in the early hours. Better to do it instead first build a random, chaotic factory This will help the player to get through the first two levels.

Although this creates more chaotic factory stuff, the player can then spend his time working in a more efficient factory nearby. They can set up all their machines and power sources the way they want and then wait for it to activate until it all comes together. Then the player only they need to move the resources they need away from their old factories and to a more efficient one.

Like many simulator games, you have to start small and earn resources while waiting for the right moment to introduce something new. It is not less here and you need it make sure resources and parts go as fast as possible before trying to create something more beautiful and aesthetically pleasing – and efficient as well.

Build the Right Supply Lines

As the player gets it further into the game, they will very efficient supply lines are needed to meet their high demand for resources. While conveyor belts are perfect for nearby nodes, transporting resources can be very slow over longer distances.

To keep things running smoothly, players will want to build trains and drones instead Satisfactory it can rapidly transport resources around the world. This is especially useful as a player they should move away from the main center area access different resources.

As players continue their transportation journeys, other modes of Transportation will be unlocked, Hypertubes are the fastest way to transport goods from different centers. Each type of transport has its pros and cons, and some updates have treated some options better than others, but they're all pretty reliable at this point in the game, and you can move supplies faster and more efficientlyyou will be better off.

Disconnectors, junctions and wall-mounted sockets

Separators and Joints are a big part of any organized factory because they enable the player correctly redirects the crafted pieces in a different way. Splitters are great when a player makes a high number of simple parts and wants to split them between Assemblers to create higher-level parts.

When placing these items, you will want to
make sure the inlets and outlets are facing the correct direction
. You don't want to send materials back or accidentally connect supplies to a conveyor belt you don't want.

Combinations are the opposite it is best used to reduce the amount of conveyors needed and is especially useful when trying to direct parts at the end of a player factory to storage bins. Finally, Wall-mounted sockets are designed to route power currents through walls, allowing the player install generators outside their factories without putting down an obscene amount of power poles. This saves resources and makes things look cleaner.

Clear new areas

Before starting to work in the factory and set up the supply lines, not every place will be cleaned for you. Instead, you'll want to make sure the new factory you're building doesn't have too much baggage and you can clear the platforms and continue after the area is cleared.

If you have an old factory, after a new, more efficient factory is built, go ahead and tear it apart and get some resources back after running a new one. Cleaning up after yourself will make things a lot easier in the long run. For example, an old factory can be transformed into something new that no longer has to keep you afloat.

Concrete Floor and Conveyor Poles Required

\While it's easy to hit the machines and belts on the bare floor, this later it can create many problems related to space and organization in the game. Concrete Floors become the player's greatest tool for dealing with disorder. By lowering the floor the player can build his factory in a series of structured gridsallowing them to measure the exact layout of factory lines.

Combine this with the Ctrl key allowing the player to build tight and organized structures Satisfactory. The player can then take the conveyor poles for layout The exact location where the conveyors will travel throughout the factory and ensure that they can use all their space as efficiently as possible.

Understand when resources will be allocated

Not only is a splitter useful for parts, it can also be invaluable for resources. If too many resources are pumped into a particular line in the factory, then machines in this line will be terribly inefficient in the long run. A full line means that the machines cannot process the resources quickly, that is, the resources will not move on the belts, which means that resource Miner will remain empty.

You would want to consider 120 as the ideal ratio for materials on a conveyor belt. For more than that, start splitting it into multiple belts.

All this leading to slower production of parts. The way to fix this is to install a splitter somewhere in the line to direct the resources to a different belt that requires more resources. This saves the player in the long run as they will be able to create more parts by collecting fewer resource nodes overall. This is the part load balancing problem players will have to deal with it.

Have Dedicated Areas for Storage and Power

One of the best tips a player can learn to build their own factory is ttry to have special places for those storage containers and generators. Storage Containers must be installed near the player's home base and the Sky Elevator. This allows them to easily grab resources and use them to beat levels.

With generators, player should build special power plants instead of having generators next to every factory line that needs it. If the player is okay with each other, making refueling generators much easier because the player does not have to run around his factory to find each individual energy source. Remember, as mentioned earlier, you can install generators outside the factory.

Remember the Game's Tendency to Lag

Players who manage to go further Satisfactory and you won't have one of the most powerful computers on the planet you probably noticed that the game lags a bit it becomes more complex as a factory. This is due to the fact that there are a lot of moving parts to keep track of, so players will want to do everything possible to avoid this.

Although you can try the old wired connection over Wi-Fi, this is not always an easy solution. Other things to keep in mind that affect your factory setup are:

1. Try building smaller, decentralized factories and shipping materials back.
2. Lower the settings if needed.
3. Avoid destroying leaves and things that are not directly in the way. The map checks for changes you've made while it's loading, so if you've destroyed a lot, the map will take longer to recognize what you've done and increase latency.

to make an efficient factory Satisfactory It's a sure way to help because it ensures that the player can create the number of pieces needed to continue in the game while requiring fewer machines and resources. Keeping plants separate will also help this process.

Source: YouTube/SpectrumDad